Especialidades JA/Tallado en madera/Respuestas

Tallado en madera

Nivel de destreza

2

Año

1938

Version

26.12.2024

Autoridad de aprobación

Asociación General

1

Explicar las cualidades de madea dura y blanda y mencionar las mejores maderas para tallado en madera.

2

Describir las diferentes herramientas de tallado en madera y explicar la forma de afilarlas.

Knife

Adventist Youth Honors Answer Book/Woodworking Tools/Knife

Chisel

Adventist Youth Honors Answer Book/Woodworking Tools/Chisel

Gouge

Adventist Youth Honors Answer Book/Woodworking Tools/Gouge

Coping saw

Coping saw

Coping saws are very useful for removing bulk. A carving can often be roughed in with a coping saw, and once the shape is cut out, knives, chisels, and gouges can be used to clean it up and do the final shaping. Coping saw blades can be sharpened with a triangle file, though they are cheap enough that they ore more frequently replaced when dull.

The blade can be installed on the coping saw so that it cuts on either the pull stroke or the push stroke. Experiment to see which you like better. To make a cut, clamp the piece to a bench or hold it firmly with your free hand or knee. Align the blade with the pencil mark you have made which will guide the cut. Gently work the saw up and down to make the cut. You may have difficulty at first, and this does take a little practice to master. But once you have it down, it is not all that difficult. Follow the line until the cut is complete.

3

Explicar los mejores métodos de manipulación de la fibra de la madera en diseñar.

Wood is very much like a bundle of straws glued together with a weak adhesive. It is easy to separate the straws from one another, but more difficult to break the straws. The woodcarver needs to keep this in mind as the piece is designed. For instance, if carving an animal, the grain (or "straws" in our analogy) needs to run in the same direction as the legs. Otherwise, the legs will easily break off.

4

Diseñar y tallar una placa en bajorrelieve.

Low relief, also known as Bas (pronounced bah)-relief is a method of sculpture which entails carving away the surface of a flat piece of wood creating a picture.

5

Diseñar y tallar dos de los siguientes objetos:

5a

Silbato

5b

Abridor de cartas o abrecartas

5c

Bandeja

5d

Sujetalibros

5e

Cubierta de un reloj

5f

Un objeto equivalente de su elección

As an honor instructor, it will be your responsibility to vet alternative designs proposed by your Pathfinders. Be on the lookout for over-ambitious designs, but be careful not to quash your Pathfinder's spirit. Offer suggestions to make the project attainable.