Translations:Adventist Youth Honors Answer Book/Recreation/Wilderness Leadership - Advanced/21/en

To make a debris hut:

• Build it by making a tripod with two short stakes and a long ridgepole or by placing one end of a long ridgepole on top of a sturdy base.
• Secure the ridgepole (pole running the length of the shelter) using the tripod method or by anchoring it to a tree at about waist height.
• Prop large sticks along both sides of the ridgepole to create a wedge-shaped ribbing effect. Ensure the ribbing is wide enough to accommodate your body and steep enough to shed moisture.
• Place finer sticks and brush crosswise on the ribbing. These form a latticework that will keep the insulating material (grass, pine needles, leaves) from falling through the ribbing into the sleeping area.
• Add light, dry, if possible, soft debris over the ribbing until the insulating material is at least 1 meter thick--the thicker the better.
• Place a 30-centimeter layer of insulating material inside the shelter.
• At the entrance, pile insulating material that you can drag to you once inside the shelter to close the entrance or build a door.
• As a final step in constructing this shelter, add shingling material or branches on top of the debris layer to prevent the insulating material from blowing away in a storm.

Snow Shelters

Igloo construction

Another option is to build an igloo, build a snow fort, hollow out a snow drift, or build a Quinzhee (which is made by first making a pile of snow, and then hollowing it out). All of these require a considerable expenditure of energy, and it is imperative that the workers not soak their clothing with sweat while working. If you find you are sweating, remove a layer or two.